Atermらくらく「かざして」スタートfor Android

설명 Atermらくらく「かざして」スタートfor Android

Site Editorial Commentary：You can set connection with Aterm (Etamu) wireless LAN base unit by reading an NFC tag that is attached to the wireless router Aterm.

Easily configure Wi-Fi connections between your Android smartphone or tablet and your Aterm series wireless router by simply reading the NFC tag included with the Aterm router using this app.

**Key Features:**
* **Effortless Setup:** Simplifies Wi-Fi configuration using NFC technology.
* **User-Friendly Interface:** Designed for easy and intuitive operation.
* **Quick Connection:** Establishes a Wi-Fi connection in just a few seconds.

**Compatibility:**
* Requires Android 4.4 or higher (compatible with Google Play and NFC-enabled smartphones and tablets).
* For detailed compatible versions, please visit AtermStation: [https://www.aterm.jp/product/atermstation/special/rakuraku_kazashite_android/index.html](https://www.aterm.jp/product/atermstation/special/rakuraku_kazashite_android/index.html)

**Confirmed Connection Devices:**
* Please check AtermStation for confirmed smartphone, tablet, and Aterm series compatible models: [https://www.aterm.jp/product/atermstation/special/rakuraku_kazashite/page3.html](https://www.aterm.jp/product/atermstation/special/rakuraku_kazashite/page3.html)

**Important notes:**
* If the NFC tag is difficult to read, please try the following:
* Refer to your smartphone/tablet's instruction manual or contact the manufacturer to locate the NFC reader.
* Allow a few seconds for the tag to be read.
* Slowly bring the NFC reader on your smartphone/tablet parallel to the NFC tag. If it cannot be read, try moving the device slightly forward, backward, left, or right, or bring it closer to the NFC tag.
* Remove any cases or covers from your smartphone/tablet that may interfere with the NFC reading.
* Do not place the Wi-Fi settings sheet on metal when reading the tag.
* If the NFC tag is not read correctly, the "Select an action" dialog may appear. If this happens, please run the app again.
* The app can configure the SSID and encryption key of the Aterm (parent device) with their initial values. It cannot be configured if these values have been changed from the initial settings.
* Ensure that the firmware of the Aterm you are connecting to is up to date. If not, please update it to the latest version.
* Configuration is not possible if the product is operating in child mode or repeater mode.
* If you read the NFC tag again or operate other apps during configuration, the setup may be interrupted and restarted from the beginning. It is recommended to avoid other operations until the configuration is complete.
* Internet connection settings cannot be configured correctly in bridge mode, wireless LAN access point mode, or multi-stage router connections (Wi-Fi connection settings are still possible).
* If an IP address conflict is detected during internet connection setup, the setup may fail. In this case, configure the settings on the Aterm's WEB configuration screen.
* Smartphones that cannot complete Wi-Fi connection after the router restarts cannot perform internet connection settings (Wi-Fi connection settings are still possible).